| NUMBER OF CUTTER INSERTS | ||
|---|---|---|
| Model | Standard | Optional |
| CX-12 | 32 | 64 |
| CX-24 | 64 | 128 |
| CX-36 | 96 | 192 |
| MODEL | APPROXIMATE OVERALL DIMENSION (INCHES / MM) | HP | ||
|---|---|---|---|---|
| A | B | C | ||
| CX-12 | 15 3/4 | 10 | 15 1/16 | 15 to 40 |
| CX-24 | 27 3/4 | 10 | 15 1/16 | 20 to 75 |
| CX-36 | 39 3/4 | 10 | 15 1/16 | 25 to 125 |
WARNING: In order to clearly show details of machines, some covers, shields, door and guards have either been removed or shown in an open position.
Be sure that all protective devices are properly installed before operating equipment.
Failure to follow this instruction may result in damage to the machine components and/or personal injury.
MUNSON maintains a 5000 sq ft (465 m2) laboratory for free testing of customer-supplied materials on eight different types of full-scale size reduction machines to ensure the optimum selection of equipment, and document the performance each customer can expect. A variety of equipment is also available for short-term on-site testing.
