ULTRA-HIGH CAPACITY MAGNUMTM CUTTERS

Magnum™ Screen Classifying Cutters
for large-scale applications

An ultra-heavy-duty version of the SCC Screen Classifying Cutter, MUNSON's Magnum™ SCC model boosts capacity by approximately 75 percent and accommodates larger infeed sizes.

Its 22.5 in. (572 mm) wide infeed throat houses an 18 in. (457 mm) diameter rotor comprised of a progressively stacked helical array of "four-sided stars," each of which holds four one-inch wide (25 mm wide) replaceable cutter blades.

Operating at speeds from 30 to 3600 RPM, the smallest 24 in. (610 mm) long Magnum SCC model can process up to 240 cu ft/h (6.8 m3/h), while the largest 72 in. (1829 mm) long model can process up to 720 cu ft/h (20.4 m3/h), depending on application.

Round bed screen perforations range from 1/32 to 2 in. (0.79 to 51 mm) in diameter, and square perforations from 1 to 6 in. (25 to 152 mm), allowing the reduction of materials into uniform particle sizes.

 

Round bed screen perforations range from 1/32 to 2 in. (0.79 to 51 mm) in diameter — square perforations from 1 to 6 in. (25 to 152 mm) — yielding uniform particle sizes.

Round bed screen perforations range from 1/32 to 2 in. (0.79 to 51 mm) in diameter — square perforations from 1 to 6 in. (25 to 152 mm) — yielding uniform particle sizes.

SCC Magnum Cutters

The Magnum SCC's helical rotor design provides maximum throughput
with minimal fines or heat generation, while ensuring uniform wear.