HAMMERHEADTM HAMMER MILLS

Features

  • Large, obstruction-free product feed opening
  • Peripheral hammer velocity from 3,600 to 24,000 ft/min (1100 to 7,300 m/min) together with hard-faced breaker plates and perforated bed screen, reduces wide range of material types and sizes at high rates
  • Greater output per horsepower/kilowatt than other types of mills
  • Hardened steel hammers with "stepped ends" offer three-times the cutting edges of square-end hammers
  • Four-way reversible design allows all stepped hammer corners to be utilized prior to replacing
  • Cylindrical bed screens with perforations from 1/32 to 3 inch (0.8 to 76 mm)
  • Lower transition for pneumatic removal of reduced materials
  • Hinged mill case door provides unobstructed interior access for rapid inspection and changing of breaker plates, screens and hammers
  • Machined-mated surfaces of door and mill case provide dust-tight operation
  • Direct-coupled drive
  • Welded heavy-plate carbon steel mill case maintains precision alignment of dynamically-balanced rotor assembly despite extreme impact and high loads of demanding applications
 

Closed access door of HammerHead™ mill case holds cylindrical breaker plates and bed screens captive. Shown with full-width inlet at top, and transition at bottom for pneumatic removal of reduced material.

Closed access door of HammerHead™ mill case holds cylindrical breaker plates and bed screens captive. Shown with full-width inlet at top, and transition at bottom for pneumatic removal of reduced material.